Load
Load
Safety & Technical
> Safety and Technical > Destructive tensile test report
Destructive tensile test report
Test conditions
ㆍMachined and heat treated
ㆍSpecimen: SHOULDER PIN
ㆍPin for: 10,000 lbs (4.5 ton)
ㆍTotal # of specimen: 6 ea.
ㆍDiameter of specimen: 13 mm
The above graph and data are regarding tensile test results of six (6) 10,000 lbs (4.5 ton) shoulder pins. According to the results, average maximum load that one shoulder pins can hold is 20.3 ton. Safety factor ofone single pin for 10,000 LBS HOIST RING is about 4.5. Each hoist ring set uses 2 shoulder pins. Each HYUDNAE PRECISION’s HOIST RING guarantees the safety factor of more than 5. Destructive tensile strength test report will be available upon request.
The above graph shows the following 3 points as followings.
1. Consistency of material and heat treatment quality
2. Consistency of stable yield & tensile strength
3. Safety factor guaranteed
Tensile test of a completely assembled hoist ring
ㆍSpecimen: CFM2061 (Rated Load: 11 TON)
ㆍA Shoulder Pin Broke at max load 73.2 ton
Safety Factor
= Max Load ÷ Rated Load
= 73,169.74 kgf ÷ 11,000 kg
= 6.65
* Safety factor of CFM2061 (11 ton) is 6.65.